Tag: CCNP

• EIGRP – Part 2

  February 10, 2026

  +

  +

  +

  +

  +

  +

  I’ve already done one post regarding EIGRP, but I said I was going to do a second post going over a few more advanced topics regarding EIGRP routing protocol. Check out my previous EIGRP post by clicking here. EIGRP uses Hello packets to check that their neighbors are still active,…

  +

  +

  +

  +

  +

  +

  + CCNA, Studying

  + CCNA, CCNP, Cisco, EIGRP, Lab, Network+, Networking

  +

  +

  +

  +

  +

  +

  +

  +

  +

  +

  +

  +

• OSPF

  February 3, 2026

  +

  +

  +

  +

  +

  +

  OSPF stands for Open Shortest Path First it is an interior gateway routing protocol. OSPF is a link-state routing protocol. OSPF is my go to protocol that I like working with, OSPF is not a vendor specific protocol, a number of vendors also run OSPF on their networking devices, I’ve…

  +

  +

  +

  +

  +

  +

  + CCNA, Studying

  + CCNA, CCNP, Cisco, Network+, Networking, OSPF, Routing

  +

  +

  +

  +

  +

  +

  +

  +

  +

  +

  +

  +

• Spanning tree protocol

  December 2, 2025

  +

  +

  +

  +

  +

  +

  With the scaling of today’s networks switches end up connecting to each other, sometimes a switch is connected to a switch to for more access ports in a growing office or connected for redundancy between switches, if a link fails traffic can go through one of the other links that…

  +

  +

  +

  +

  +

  +

  + CCNA, Network Lab

  + CCNA, CCNP, Network+, Networking

  +

  +

  +

  +

  +

  +

  +

  +

  +

  +

  +

  +

• Home Labs – Hardware Vs software

  November 20, 2025

  +

  +

  +

  +

  +

  +

  Home Lab Setup for CCNA/CCNP/Networking There is always “the great debate” when you’re studying for your certification exams if you should build your lab with hardware or software. In my opinion, what I have done is gone with both. I think you should have 2-3 routers, 2 switches and sometime…

  +

  +

  +

  +

  +

  +

  + CCNA, Network Lab, Studying

  + CCNP, Network+, Networking

  +

  +

  +

  +

  +

  +

  +

  +

  +

  +

  +

  +

• all in one lab

  November 13, 2025

  +

  +

  +

  +

  +

  +

  This is my currently all in one labs that I’ve setup for my studying for my 300-410 ENARSI This lab allows me to configure a number of protocols OSPF, EIGRP and BGP.  I’ve configured route redistribution between OSPF to BGP and BGP to EIGRP allowing me to ping across the…

  +

  +

  +

  +

  +

  +

  + Network Lab, Studying

  + CCNP, Network+, Networking

  +

  +

  +

  +

  +

  +

  +

  +

  +

  +

  +

  +